ACDelco Battery

Problems and causes

Formation of dust and exhaust fumes integrated with steam in the air resulting in diffusion and frosted glass which causes unclear visibility.

Features and Benefits

• Have efficiency of cleaning smoke, smut, dusts, insects and ingrained stains very well.
  
• Clean all type of glass including automotive glass which will not cause damage to the tint, mirror, resident or office windows without remaining stains or scratches and can prevent dust very well.
• Can be used with the surface which needs a special care such as glass, table, ceramic bowls, porcelains, TV screen, Formica surface and Vinyl surface.

Directions for use

Shake the can before use by spraying on surface which would like to clean thoroughly in appropriate quantity and then using soft and thin paper for instance newspaper or soft cloth to wipe off cleanly

Problems and causes

Any dirt stains occur from usage which stick on surface and cannot be clean by washing with water. It is caused dirty and not shine such as passenger room trim surface, equipments and tools and appliances.

Features and Benefits

• Can be used with any equipments in resident, office, marine, automotive.
• Suit for genuine leather and Vinyl seats, Vinyl surface, Vinyl roof of ship, floor mat and most kinds of cloth surfaces, plastic surface, and any apparatuses.
• Dissolve oil stains, tea, coffee, sauce, footprint, rain stains or other ingrained that hard to be clean.
• Special two-in-one formulation with deep cleaning without surface damage and prevent from dust and dirt efficiently.
  

Directions for use

• Shake the can before use.
• Spray form on the area which would like to be clean directly after that using dry cloth to wipe off or dirt stains off.

Problems and causes

Any dirt stains occur from driving stick at wheel and wheel cover which cannot be clean by rinsing with water or general car wash (Alloy wheel), become dull and not shine.

Features and Benefits

• Use for cleaning Alloy wheel.
• Eliminate any dirt stains such as brake fluid strain, smuts from brake pads that stick at wheel edge and cover.
• Can be used to clean metal, aluminum and stainless equipments, and apparatuses.
• Deep cleaning especially the area which hard to clean without damage the surface.

Directions for use

• Spray the chemical on area that would like to clean thoroughly in appropriate amount, wait for 1 minute.
• Clean up with water and wipe dry.
• If it is needed to wipe ingrained dirt stains may need to increase cleaner quantity and scrub with a brush.

Problems and causes

Any dirt stains and scratches occur from driving which cause the wheel look old, not shine. Moreover sunlight will make rubber harsh, not elastic and resulting in lower gripping efficiency.

Features and Benefits

• Wash dirt stains occur from driving.
• With the special copyright formulation of ACDelco, this cleaner can also eliminate scratches of tire surface, reduce sticking of dust and dirt without damage rubber compound. It will make tire surface shining and always looks new with no strain left.
• Longer tire life by special chemical properties to protect tire surface, elasticity and not harsh.

Directions for use

• Wash the car and tire cleanly to get rid of dirt. After that wipe dry.
• Spray the cleaner on sidewall directly with no need to wash off and then left to dry.

Problems and causes

Integration of brake fluid stains with dust and any particulates will agglomerate at brake parts such as brake pedal string, brake shaft brake piston and brake disc which causes noise when pressing brake, scratched brake disc and not grip well and reduce braking efficiency.

Features and Benefits

• The cleaner dries fast and no dirt stains left on the surface.
• Remove dust, oil stains, soils and grimes stick at brake system to increase more braking efficiency.
• Reduce brake noise occur from dust or grime.
• Can be used to clean and displace moisture electrical components such as alternator, starter motor, control switches.
• Extend equipments usage life in brake system and electrical system to reduce maintenance cost.

Directions for use

• Use for cleaning oil stains in engine room which no need to wash out by water.
• Should remove brake components off before cleaning.
• Spray on surface or components which would like to clean and left to dry or wipe off by non woven cloth.

Problems and causes

Parking vehicle outdoor, sunlight will make paint finish fade off, dull and not beautiful. Moreover vehicle with long age will cause paint degradation as well.

Features and Benefits

• Remove grime, smut from exhaust.
• When cleaner dries will look like thin film to protect from UV light, tree sap, bird dropping, tar and can protect from scratches, imperfections efficiently.
• Stick with surface very well and durable for washing.
• Not damage surface and paints.
• Make vehicle paint bright and shine and always look new.

Directions for use

• Clean up vehicle before polishing
• Squeeze cleaner on clean cloth and polish roundly in 2 square feet.
• Wait for cleaner to dry and use dry and soft cloth to wipe off till lustre appears.
• Polish with cleaner again if require.

Problems and causes

Oil stains on paint surface due to tar, oil stains and dust from driving cause paint corroded and peeled off.

Features and Benefits

• Remove oil stains, tar, dust stick on body from driving.
• Remove wax stains, polish stains, glue and grime that hard to be clean.
• Use as all purposes cleaner to clean up undesirable grime on metal, plastic, laminate and other surfaces without damage paints.

Directions for use

• Clean up vehicle.
• Squeeze the cleaner in an appropriate amount on a clean cloth, wipe or scrub at the area which want to clean till grime is removed and then wipe with dry and soft cloth again.
• If want to remove in grained stains can apply directly and then scrub softly till dirt is removed.
• For vehicle which just have new paint finish can mix cleaner with coal oil equally to clean up dust or grime from paint finish without damage paints and surface.

Problems and causes

When engine has been used for a period will have cumulative sediments, oil stains and smut stick between piston and crankshaft cylinder, camshaft of engine which reduce oil supply efficiency, combustion and lubrication. From this reason, it can cause engine overheated and incomplete combustion.

Features and Benefits

• Remove grime and oil stains from engine lubrication system which be removed when engine oil is drained.
• Help cleaning engine room components.
• With special formulation of ACDelco will increase engine power and more easily start up even in cold temperature, running smooth and more accelerated.
• Has oil film coating internal engine components to protect wear and extend engine life and reduce maintenance cost.

Directions for use

• Use for both Benzene and Diesel engine.
• Fill up cleaner in engine completely before draining the oil. After filling the cleaner and engine oil is over specific level, drain off slightly till defined level.
• Start the engine for 10-15 minutes.
• Drain oil engine oil and change oil filter and fill up again.

Problems and causes

When carburetor and throttle body joints have cumulative oil stains, dust and dirt, it can cause malfunctioning of the carburetor and choke, engine knock and high fuel consumption.

Features and Benefits

• Remove oil stains, dusts, deposits and grime from joints and outside carburetor surface, fuel hoses and throttle body.
• Remove moisture mix with fuel, lubricates washer, valves.
• Clean combustion chamber, engine is clean, increase fuel and air flow efficiently which will result in engine runs smoothly and increase acceleration.

Directions for use

• Use for Benzene engine only.
• Start engine and wait until cool, accelerate engine higher than normal idle rotation speed at 200-300 RPM.
• Remove air filter and spray cleaner at carburetor.
• Leave it until cleaner is volatile and dry.

Problems and causes

Sometime when run the engine will found that engine is jerk or stall or even while driving, engine is not running smoothly or stumble, loss power, more fuel consumption. All this problems causes from cumulative deposits in fuel system at injector, carburetor and combustion chamber.

Features and Benefits

• Can be used with vehicle with has low Octane.
• Remove smut and grime which cause injector, intake valve and exhaust manifold clogging.
• Improved fuel combustion such as reduce emission.
• Protect from knocking of engine, increase engine power, making engine run smoothly and increase acceleration.
• Reduce fuel consumption.
• Extend Oxygen sensor and catalytic convertor life.

Directions of use

• Use for Benzene engine only.
• Add one container of cleaner  to Benzene fuel tank a time of fuel fill up (approximately of 1 time fill up = 50-60 liters)
• If the injector is very much dirty, can use two container per tank for more cleaning efficiency.

Problems and causes

Rust stains which occur with engine components is one of the problem which causes operation of engine components malfunction and cause damage such as locks to stick, nuts and bolts to jam and hinges to bind.

Features and Benefits

• Can be used for both dry and wet surface.
• Can be used with any equipments in automotive, marine, household, offices and garden tools.
• Have excellent feature in penetration to eliminate rust stains.
• Use for general lubrication, lubricate sticky components and stick back together.
• Repel moisture from surface to protect from rust.

Directions for use

• Spray cleaner on surface or components want to lubricate thoroughly in appropriate amount, allow the product to soak into the surface and apply appropriate force to loosen sticking or binding parts

Problems and causes

When components and equipments of vehicle, tools, machines are rubbing and have been used for long time, it will cause corrosion and loosen which will be the cause of noise and not optimize equipment operation.

Features and Benefits

• Use for components in engine.
• Can be used with equipments in household, office, marine, and garden tools.
• Increase lubrication efficiency, protect from corrosion and rust.
• Reduce noise from rubbing.
• Resist high temperature at 100 C degree.

Directions of use

• Shake the can before use.
• Spray on the area that wants to lubricate in appropriate amount.
• Use with attached plastic tube in case of using with the area that hard to be accessed.

Problems and causes

As transmission has been operated all the times while driving may reduce the efficiency of lubrication in transmission system resulting in sluggish transmission system and other problems.

Features and Benefits

• Adjusting transmission fluid condition with concentrated additive.
• Increase efficiency to transmission fluid quality additives.
• Increase ability of lubrication, anti-wear and anti-foaming properties.
• Protect transmission components from rust.
• Extend transmission fluid life and improved seal swell performance.
• Can use to top up as transmission fluid in case the fluid level is lower without making fluid viscosity change.

Directions of use

• Pour entire container of conditioner in transmission fluid
• Should fill up every 48,000 km (or every 13,000 km in case of heavy usage.
• Should add transmission conditioner every times that draining the fluid
• Fill up conditioner 350 ml to one transmission.

Problems and causes

When engine has been used severely which cause degradation of oil quality. Moreover it also causes cumulative dirt, acid and rust. All of these cause engine wear prematurely and may be damaged.

Features and Benefits

• Has neutral ph values from acidity and alkalinity.
• Increase efficiency of cleaning dirt and smut deposits
• Protect knocking even in severe usage such as long distance driving and overheated engine.
• Protect engine wear to extend engine life and reduce maintenance cost.
• Reduce valve noise.

Directions of use

• Can be used for both Benzene and Diesel engines.
• Fill up a container of additive with oil every time of engine drain.

Problems and causes

When engine was used will have deposits or dirt formation such as fuel stains or clogged deposits in fuel system which will cause engine operability problems.

Features and Benefits

• Remove and protect deposits accumulation of fuel injector and fuel pump.
• Protect fuel wax build-up efficiently.
• Remove fuel related deposits such as carbon and vanish efficiently.
• Reduce fuel system components wear.
• Increase diesel engine operation efficiency, reduce emission, increase compression of engine which will allow engine running smoothly and increase acceleration.
• Reduce fuel consumption and improves flow properties of diesel fuels in cold weather.

Directions of use

• Use for Diesel engine only.